Home >> News

HOT PRODUCTS

    Shijiazhuang wufeng thermal machinery Co.,LTD is a company

    Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the glass m-at treatment furnace. The production base locates in the convenient transport Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the
    Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the glass m-at treatment furnace. The production base locates in the convenient transport Shijiazhuang wufeng thermal machinery Co.,LTD is a company that specialize in manufacturing the

    The emergency troubleshooting methods of glass tempering furnace

     With glass reciprocating motion,tempering furnace in the process of production can appear the following ffault:
     
      1 The blast furnace: in the process of production, especially the thicker glass, there will be a crack in the chamber of a stove or furnace glass. If there hava a explosion, it must immediately stop the main drive, shake the glass with hand, rise the furnace body, to see whether the glass broken.
     
      2 Main drive anomalies: if electric furnace in the process of production appears main drive anomalies, it is generally caused by encoder or chain abnormal, at this time you should shake the glass with the same method above.
     
      3 Power outages: tempering furnace is in the process of production encounters power failure, According to the following method processing:
     
      1) Shake the glass out of the furnace quickly.
     
      2) If glass sag on the ceramic roller (touch roll), stirring up gently with the template, and don't knock.
     
      3) If the glass does not pick out, it must immediately cool the temperature. When the temperature cools down, you can use blade to strike off or do other processing.
     
      4 Crash: in the process of production, some crash would happen, generally there are two kinds of situations:
     
      1) A crash is that the glass just enter into the furnace at that time the main drive is stopped, because this glass is too long.
     
      2) Heating time will not be timed. Processing method: immediately shake the glass body, power and restart.
     
      5 Abnormal heating system: heating control panel of tempering furnace occurs failure usually in the process of heating, and it will rise the temperature. Then it needs to cut the power off, open the poppet valve and dynamo main drive to keep ceramic roller rotation, notify maintenance personnel of the equipment to conduct a comprehensive inspection.
     
      6 Furnace door won't open and the heating glass can not get out. Air compressor problem caused the furnace door won't open, so we should quickly take following measures:
     
      1) Climb the roof, open the rear door with physical strength, expel from the glass quickly.
     
      2) You can open up the cooling cone valve while rising furnace. Stop the main drive, shake the glass with hand, when there are no glass in the furnace, you can go down the furnace.
     
      Our company's tempering furnace always insists that "quality first, reputation first", warmly welcome new and old friends of the patrons!

    Previous news:Prevent the glass in the tempering furnace burst solution

    Next News:Scrubbing method of tempering furnace

Home|About us|Products| Honor|Project|News| Contact us

Copyright©2000-2015 Shijiazhuang Wufeng Thermal Machinery Co.,Ltd. All Rights Reserved